Tie Down Assembly

January 19th, 2018, 7h

I finally got a metal blade, so we were able to work on the tie down assembly:

  • Cut the tie down spacers.
  • Smoothed the edges.
  • Clamped the spacers to the front spar with the tie down and drilled the holes for the bolts.
  • bolted the platenuts and drilled holes for the platenuts.
  • Deburred.
  • countersunk
  • Primed the surface between the spacers and the tie down.
  • rivets the platenuts to the spacers and tie down.
  • fitted the tie down assembly, but it did not fit.  The holes must have shifted lightly during the drilling.
  • Grinded the edges of the spacers to get them to fit.

IMG_0744.jpg

  • Then, I cut down the edges of the back spar attachments, and smoothed them.

IMG_0749 (1).jpg

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s