Wing internals continue

November 2nd, 5h

I continued on the prep for the wing riveting.  So, I finish all the pitot/AoA probe wiring:

  • Attaching the wires from the probe to the controller with zip-ties and zip-tie attachments that I glued with E6000 to the control unit.
  • Extending the wires from the control unit by using 20 gauge wire of the same color and butt connectors
  • Applying a wire protection for all the pitot/AoA wires, as well as the stall horn wire.

IMG_1699.jpg

IMG_1700.jpg

IMG_1701.jpg

I also looked into attaching the pitot probe to the must with screw, but I had some trouble with tapping the holes.  I am consulting with Dynon on that, and my current plan is to fill those holes with JB weld and to make new ones.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s