Centering Aileron and Setup Flaps

November 23nd, 6h

I centered the ailerons by creating a jig to set the ailerons at the neutral position.  Then, I torqued to setting all the aileron bolts once it is set at neutral. Afterwards, I attached the flaps while making sure that the trailing edge of the aileron and flap align.  Afterward I drilled the skin to the brace and flap hinge, in the pre set flap position.  After deburing, I dimpled the skin and countersink the brace. Now, the flap hinge is ready to be riveted to the bottom skin.

IMG_1769.jpgIMG_1768.jpgIMG_1766.jpgIMG_1765.jpgIMG_1764.jpgIMG_1763.jpg

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s