January 3rd 2021, 3h
After some time of traveling in Arizona and Utah, I am excited to continue working on the plane.
I started by leveling (ah it was perfect!), then drilling and prepping the fuselage deck.
Then I proceeded with the side rails: drilling, fitting and prepping for riveting
December 13th, 4h
To level the fuselage, we needed to build some sawhorses that are better than the quick and dirty solution we put together to flip the canoe.
After we build the sawhorses, we started the level process. Well, we did not need to do much, it was perfect, everywhere.
April 5th, 19th, 26th, May 3rd, 10th & 17th, 48h
Riveted the aft fuselage:
Disassembled the aft fuselage, deburred, dimpled, primed, then assembled it back for riveting and checked alignment again:
Assembled the Aft Fuselage, checked alignment, and drilled:
Assembled and riveted some sub component of the aft fuselage