Priming Spars and Ribs

January 23rd, 24th and 25th, 2018, 19h

I did a pretty large priming job, tacking the spars and all the wing ribs. I did follow all the recommended steps for priming to see if I will get better results then the priming I did in the empennage:

  • scratch all the parts with a scotchbrite
  • rinse all the parts
  • clean all part with acetone
  • brush all the parts with alumiprep
  • ¬†rinse all the parts
  • clean all part with acetone
  • Prime

The result looks good, I tried to peal by hand the primer of one of the ribs and I did not succeed.